Free Shipping $199+
LithiumBatteryz

Husqvarna TE610 Battery

2000–2001. The OEM battery case the TE610 takes, the lithium that drops into it, and every model year we have on file. One case across the whole run.

Your Ride
Year
Make
Model
Change any box to look up another bike.
Your ride

2001 Husqvarna TE610

Not yours?
OEM battery
ATZ10Manufacturer fitment list
Case family
YTZ1012V starter case
Fits all years
2000–2001same case every year on file

The Husqvarna TE610 takes the ATZ10 case. The Antigravity ATZ-10 RE-START is a drop-in for that case: 360 cranking amps, 2.6 lb, a built-in jump start that saves enough charge to get you home. Antigravity's list names the ATZ10 for this model; Yuasa's guide names the YTX14-BS case for some trims. Go by the code on your old battery.

See the Antigravity ATZ-10

TE610 battery by model year

2000–2001Your year · 2001OEM batteryATZ1012V starter caseWhere it comes fromManufacturer fitment listLithium that fitsAntigravity ATZ-10 RE-START →Antigravity ATZ-10-HD RE-START →Antigravity ATX12 RE-START →Antigravity ATX12-HD RE-START →Ionic S4 →Antigravity's list names the ATZ10 for this model; Yuasa's guide names the YTX14-BS case for some trims. Go by the code on your old battery.

Trim covered: TE610.

Shop all Husqvarna Dirt Bike batteries

What the TE610 needs, in plain English

Every TE610 from the first 2000 model through 2001 starts on the ATZ10 case, a 12-volt starter battery. Husqvarna ships it with a lead-acid battery that starts to fade after two or three seasons of short rides and off-season storage, and that is usually the day a rider goes looking for something better.

The lithium drop-in is the Antigravity ATZ-10 RE-START: 360 cranking amps, 2.6 pounds, the same case in lithium. Its RE-START function puts the battery to sleep before a parasitic draw can drain it, then wakes it with one press for a jump start. Antigravity's list names the ATZ10 for this model; Yuasa's guide names the YTX14-BS case for some trims. Go by the code on your old battery. Charge it with a lithium-compatible charger or maintainer for the off-season and it outlasts the lead-acid battery it replaces by years.

What size battery does a Husqvarna TE610 take?+
The ATZ10 case, the same one on every TE610 from 2000 to 2001. The Antigravity ATZ-10 RE-START is the lithium drop-in for it. Antigravity's list names the ATZ10 for this model; Yuasa's guide names the YTX14-BS case for some trims. Go by the code on your old battery.
Will a lithium battery work in a TE610 without changes?+
Yes, on a bike with a healthy charging system: the lithium battery uses the same case, the same posts and the same cables, and it drops in where the lead-acid battery sat. Bikes older than about 2000 should have their voltage regulator and rectifier checked first, since a failing one overcharges any battery and lithium tolerates it less. Fill any gap in the tray with the foam spacers most lithium dirt bike batteries include.
Do I need a different charger for a lithium dirt bike battery?+
Use a charger or maintainer with a lithium (LiFePO4) mode. A lead-acid trickle charger can push the wrong voltage profile, and a desulfation mode can damage a lithium pack. A lithium-profile maintainer over the off-season keeps it topped without harm, and the battery loses only a few percent of charge a month sitting on its own.