Free Shipping $199+
LithiumBatteryz

Yamaha Wolverine 450 Battery

2006–2008. The OEM battery case the Wolverine 450 takes, the lithium that drops into it, and every model year we have on file. One case across the whole run.

Your Ride
Year
Make
Model
Change any box to look up another machine.
Your ride

2008 Yamaha Wolverine 450

Not yours?
OEM battery
ATX12Manufacturer fitment list
Case family
YTX1212V starter case
Fits all years
2006–2008same case every year on file

The Yamaha Wolverine 450 takes the ATX12 case. The Antigravity ATX12-HD RE-START is a drop-in for that case: 480 cranking amps, 3 lb, a built-in jump start that saves enough charge to get you home. Antigravity's list names the ATX12 for this model; Yuasa's guide names the YTX20L-BS case for some trims. Go by the code on your old battery.

See the Antigravity ATX12-HD

Wolverine 450 battery by model year

2006–2008Your year · 2008OEM batteryATX1212V starter caseWhere it comes fromManufacturer fitment listLithium that fitsAntigravity ATX12-HD RE-START →Antigravity ATX12 RE-START →Antigravity ATX20 RE-START →Antigravity ATX20-HD →Ionic S6 →Antigravity's list names the ATX12 for this model; Yuasa's guide names the YTX20L-BS case for some trims. Go by the code on your old battery.

2 trims covered: Wolverine 450, Wolverine 450 SE.

Shop all Yamaha UTV batteries

What the Wolverine 450 needs, in plain English

Every Wolverine 450 from the first 2006 model through 2008 starts on the ATX12 case, a 12-volt starter battery. Yamaha ships it with a lead-acid battery that starts to fade after two or three seasons of short rides and off-season storage, and that is usually the day a rider goes looking for something better.

The lithium drop-in is the Antigravity ATX12-HD RE-START: 480 cranking amps, 3 pounds, the same case in lithium. Its RE-START function puts the battery to sleep before a parasitic draw can drain it, then wakes it with one press for a jump start. Antigravity's list names the ATX12 for this model; Yuasa's guide names the YTX20L-BS case for some trims. Go by the code on your old battery. Charge it with a lithium-compatible charger or maintainer for the off-season and it outlasts the lead-acid battery it replaces by years.

What size battery does a Yamaha Wolverine 450 take?+
The ATX12 case, the same one on every Wolverine 450 from 2006 to 2008. The Antigravity ATX12-HD RE-START is the lithium drop-in for it. Antigravity's list names the ATX12 for this model; Yuasa's guide names the YTX20L-BS case for some trims. Go by the code on your old battery.
Will a lithium battery work in a Wolverine 450 without changes?+
Yes, on a machine with a healthy charging system: the lithium battery uses the same case, the same posts and the same cables, and it drops in where the lead-acid battery sat. Check that the stator and regulator hold a steady charge, fill any gap in the tray with the foam spacers most lithium UTV batteries include, and match the terminal layout of the battery you are replacing.
Do I need a different charger for a lithium UTV battery?+
Use a charger or maintainer with a lithium (LiFePO4) mode. A lead-acid trickle charger can push the wrong voltage profile, and a desulfation mode can damage a lithium pack. A lithium-profile maintainer over the off-season keeps it topped without harm, and the battery loses only a few percent of charge a month sitting on its own.