Free Shipping $199+
LithiumBatteryz

Suzuki GSX1250FA Battery

2010–2012. The OEM battery case the GSX1250FA takes, the lithium that drops into it, and every model year we have on file. One case across the whole run.

Your Ride
Year
Make
Model
Change any box to look up another bike.
Your ride

2012 Suzuki GSX1250FA

Not yours?
OEM battery
YT12A-BSYuasa 2026 OEM guide
Case family
YTZ1012V starter case
Fits all years
2010–2012same case every year on file

The Suzuki GSX1250FA takes the YT12A-BS case. The Antigravity ATZ-10 RE-START is a drop-in for that case: 360 cranking amps, 2.6 lb, a built-in jump start that saves enough charge to get you home.

See the Antigravity ATZ-10

GSX1250FA battery by model year

2010–2012Your year · 2012OEM batteryYT12A-BS12V starter caseWhere it comes fromYuasa 2026 OEM guideLithium that fitsAntigravity ATZ-10 RE-START →Antigravity ATZ-10-HD RE-START →

Trim covered: GSX1250FA.

Shop all Suzuki batteries

What the GSX1250FA needs, in plain English

Every GSX1250FA from the first 2010 model through 2012 starts on the YT12A-BS case, a 12-volt starter battery. Suzuki ships it with a lead-acid battery that starts to fade after two or three seasons of short rides and off-season storage, and that is usually the day a rider goes looking for something better.

The lithium drop-in is the Antigravity ATZ-10 RE-START: 360 cranking amps, 2.6 pounds, the same case in lithium. Its RE-START function puts the battery to sleep before a parasitic draw can drain it, then wakes it with one press for a jump start. Charge it with a lithium-compatible charger or maintainer for the off-season and it outlasts the lead-acid battery it replaces by years.

What size battery does a Suzuki GSX1250FA take?+
The YT12A-BS case, the same one on every GSX1250FA from 2010 to 2012. The Antigravity ATZ-10 RE-START is the lithium drop-in for it.
Will a lithium battery work in a GSX1250FA without changes?+
Yes, on a bike with a healthy charging system: the lithium battery uses the same case, the same posts and the same cables, and it drops in where the lead-acid battery sat. Bikes older than about 2000 should have their voltage regulator and rectifier checked first, since a failing one overcharges any battery and lithium tolerates it less. Fill any gap in the tray with the foam spacers most lithium motorcycle batteries include.
Do I need a different charger for a lithium motorcycle battery?+
Use a charger or maintainer with a lithium (LiFePO4) mode. A lead-acid trickle charger can push the wrong voltage profile, and a desulfation mode can damage a lithium pack. A lithium-profile maintainer over the off-season keeps it topped without harm, and the battery loses only a few percent of charge a month sitting on its own.