Free Shipping $199+
LithiumBatteryz

Yamaha Raptor 110 Battery

2024–2026. The OEM battery case the Raptor 110 takes, the lithium that drops into it, and every model year we have on file. One case across the whole run.

Your Ride
Year
Make
Model
Change any box to look up another machine.
Your ride

2026 Yamaha Raptor 110

Not yours?
OEM battery
YTX5L-BSYuasa 2026 OEM guide
Case family
YTZ712V starter case
Fits all years
2024–2026same case every year on file

The Yamaha Raptor 110 takes the YTX5L-BS case. The Antigravity ATZ-7 RE-START is a drop-in for that case: 150 cranking amps, 1.3 lb, a built-in jump start that saves enough charge to get you home.

See the Antigravity ATZ-7

Raptor 110 battery by model year

2024–2026Your year · 2026OEM batteryYTX5L-BS12V starter caseWhere it comes fromYuasa 2026 OEM guideLithium that fitsAntigravity ATZ-7 RE-START →

Trim covered: Raptor 110.

Shop all Yamaha ATV batteries

What the Raptor 110 needs, in plain English

Every Raptor 110 from the first 2024 model through 2026 starts on the YTX5L-BS case, a 12-volt starter battery. Yamaha ships it with a lead-acid battery that starts to fade after two or three seasons of short rides and off-season storage, and that is usually the day a rider goes looking for something better.

The lithium drop-in is the Antigravity ATZ-7 RE-START: 150 cranking amps, 1.3 pounds, the same case in lithium. Its RE-START function puts the battery to sleep before a parasitic draw can drain it, then wakes it with one press for a jump start. Charge it with a lithium-compatible charger or maintainer for the off-season and it outlasts the lead-acid battery it replaces by years.

What size battery does a Yamaha Raptor 110 take?+
The YTX5L-BS case, the same one on every Raptor 110 from 2024 to 2026. The Antigravity ATZ-7 RE-START is the lithium drop-in for it.
Will a lithium battery work in a Raptor 110 without changes?+
Yes, on a machine with a healthy charging system: the lithium battery uses the same case, the same posts and the same cables, and it drops in where the lead-acid battery sat. Check that the stator and regulator hold a steady charge, fill any gap in the tray with the foam spacers most lithium ATV batteries include, and match the terminal layout of the battery you are replacing.
Do I need a different charger for a lithium ATV battery?+
Use a charger or maintainer with a lithium (LiFePO4) mode. A lead-acid trickle charger can push the wrong voltage profile, and a desulfation mode can damage a lithium pack. A lithium-profile maintainer over the off-season keeps it topped without harm, and the battery loses only a few percent of charge a month sitting on its own.