Free Shipping $199+
LithiumBatteryz

Suzuki King Quad 400FS Battery

2010–2021. The OEM battery case the King Quad 400FS takes, the lithium that drops into it, and every model year we have on file. One case across the whole run.

Your Ride
Year
Make
Model
Change any box to look up another machine.
Your ride

2021 Suzuki King Quad 400FS

Not yours?
OEM battery
YTX14-BSYuasa 2026 OEM guide
Case family
YTX1412V starter case
Fits all years
2010–2021same case every year on file

The Suzuki King Quad 400FS takes the YTX14-BS case. The Antigravity ATX12 RE-START is a drop-in for that case: 360 cranking amps, 3 lb, a built-in jump start that saves enough charge to get you home.

See the Antigravity ATX12

King Quad 400FS battery by model year

2010–2021Your year · 2021OEM batteryYTX14-BS12V starter caseWhere it comes fromYuasa 2026 OEM guideAntigravity fitment list agreesLithium that fitsAntigravity ATX12 RE-START →Antigravity ATX12-HD RE-START →Ionic S4 →

Trim covered: King Quad 400FS 4x4.

Shop all Suzuki ATV batteries

What the King Quad 400FS needs, in plain English

Every King Quad 400FS from the first 2010 model through 2021 starts on the YTX14-BS case, a 12-volt starter battery. Suzuki ships it with a lead-acid battery that starts to fade after two or three seasons of short rides and off-season storage, and that is usually the day a rider goes looking for something better.

The lithium drop-in is the Antigravity ATX12 RE-START: 360 cranking amps, 3 pounds, the same case in lithium. Its RE-START function puts the battery to sleep before a parasitic draw can drain it, then wakes it with one press for a jump start. Charge it with a lithium-compatible charger or maintainer for the off-season and it outlasts the lead-acid battery it replaces by years.

What size battery does a Suzuki King Quad 400FS take?+
The YTX14-BS case, the same one on every King Quad 400FS from 2010 to 2021. The Antigravity ATX12 RE-START is the lithium drop-in for it.
Will a lithium battery work in a King Quad 400FS without changes?+
Yes, on a machine with a healthy charging system: the lithium battery uses the same case, the same posts and the same cables, and it drops in where the lead-acid battery sat. Check that the stator and regulator hold a steady charge, fill any gap in the tray with the foam spacers most lithium ATV batteries include, and match the terminal layout of the battery you are replacing.
Do I need a different charger for a lithium ATV battery?+
Use a charger or maintainer with a lithium (LiFePO4) mode. A lead-acid trickle charger can push the wrong voltage profile, and a desulfation mode can damage a lithium pack. A lithium-profile maintainer over the off-season keeps it topped without harm, and the battery loses only a few percent of charge a month sitting on its own.