Free Shipping $199+
LithiumBatteryz

Kawasaki Lakota Sport Battery

2001–2003. The OEM battery case the Lakota Sport takes, the lithium that drops into it, and every model year we have on file. One case across the whole run.

Your Ride
Year
Make
Model
Change any box to look up another machine.
Your ride

2003 Kawasaki Lakota Sport

Not yours?
OEM battery
YTX14AH-BSYuasa 2026 OEM guide
Case family
YTX14A12V starter case
Fits all years
2001–2003same case every year on file

The Kawasaki Lakota Sport takes the YTX14AH-BS case. The Antigravity ATX12-AH RE-START is a drop-in for that case: 360 cranking amps, 3 lb, a built-in jump start that saves enough charge to get you home.

See the Antigravity ATX12-AH

Lakota Sport battery by model year

2001–2003Your year · 2003OEM batteryYTX14AH-BS12V starter caseWhere it comes fromYuasa 2026 OEM guideAntigravity fitment list agreesLithium that fitsAntigravity ATX12-AH RE-START →

Trim covered: Lakota Sport.

Shop all Kawasaki ATV batteries

What the Lakota Sport needs, in plain English

Every Lakota Sport from the first 2001 model through 2003 starts on the YTX14AH-BS case, a 12-volt starter battery. Kawasaki ships it with a lead-acid battery that starts to fade after two or three seasons of short rides and off-season storage, and that is usually the day a rider goes looking for something better.

The lithium drop-in is the Antigravity ATX12-AH RE-START: 360 cranking amps, 3 pounds, the same case in lithium. Its RE-START function puts the battery to sleep before a parasitic draw can drain it, then wakes it with one press for a jump start. Charge it with a lithium-compatible charger or maintainer for the off-season and it outlasts the lead-acid battery it replaces by years.

What size battery does a Kawasaki Lakota Sport take?+
The YTX14AH-BS case, the same one on every Lakota Sport from 2001 to 2003. The Antigravity ATX12-AH RE-START is the lithium drop-in for it.
Will a lithium battery work in a Lakota Sport without changes?+
Yes, on a machine with a healthy charging system: the lithium battery uses the same case, the same posts and the same cables, and it drops in where the lead-acid battery sat. Check that the stator and regulator hold a steady charge, fill any gap in the tray with the foam spacers most lithium ATV batteries include, and match the terminal layout of the battery you are replacing.
Do I need a different charger for a lithium ATV battery?+
Use a charger or maintainer with a lithium (LiFePO4) mode. A lead-acid trickle charger can push the wrong voltage profile, and a desulfation mode can damage a lithium pack. A lithium-profile maintainer over the off-season keeps it topped without harm, and the battery loses only a few percent of charge a month sitting on its own.