Free Shipping $199+
LithiumBatteryz

CFMOTO CFORCE 110 Battery

2023–2024. The OEM battery case the CFORCE 110 takes, the lithium that drops into it, and every model year we have on file. One case across the whole run.

Your Ride
Year
Make
Model
Change any box to look up another machine.
Your ride

2024 CFMOTO CFORCE 110

Not yours?
OEM battery
ATZ7Manufacturer fitment list
Case family
YTZ712V starter case
Fits all years
2023–2024same case every year on file

The CFMOTO CFORCE 110 takes the ATZ7 case. The Antigravity ATZ-7 RE-START is a drop-in for that case: 150 cranking amps, 1.3 lb, a built-in jump start that saves enough charge to get you home.

See the Antigravity ATZ-7

CFORCE 110 battery by model year

2023–2024Your year · 2024OEM batteryATZ712V starter caseWhere it comes fromManufacturer fitment listLithium that fitsAntigravity ATZ-7 RE-START →

Trim covered: CFORCE 110.

Shop all CFMOTO ATV batteries

What the CFORCE 110 needs, in plain English

Every CFORCE 110 from the first 2023 model through 2024 starts on the ATZ7 case, a 12-volt starter battery. CFMOTO ships it with a lead-acid battery that starts to fade after two or three seasons of short rides and off-season storage, and that is usually the day a rider goes looking for something better.

The lithium drop-in is the Antigravity ATZ-7 RE-START: 150 cranking amps, 1.3 pounds, the same case in lithium. Its RE-START function puts the battery to sleep before a parasitic draw can drain it, then wakes it with one press for a jump start. Charge it with a lithium-compatible charger or maintainer for the off-season and it outlasts the lead-acid battery it replaces by years.

What size battery does a CFMOTO CFORCE 110 take?+
The ATZ7 case, the same one on every CFORCE 110 from 2023 to 2024. The Antigravity ATZ-7 RE-START is the lithium drop-in for it.
Will a lithium battery work in a CFORCE 110 without changes?+
Yes, on a machine with a healthy charging system: the lithium battery uses the same case, the same posts and the same cables, and it drops in where the lead-acid battery sat. Check that the stator and regulator hold a steady charge, fill any gap in the tray with the foam spacers most lithium ATV batteries include, and match the terminal layout of the battery you are replacing.
Do I need a different charger for a lithium ATV battery?+
Use a charger or maintainer with a lithium (LiFePO4) mode. A lead-acid trickle charger can push the wrong voltage profile, and a desulfation mode can damage a lithium pack. A lithium-profile maintainer over the off-season keeps it topped without harm, and the battery loses only a few percent of charge a month sitting on its own.